Commercial Swing Gate Operator with two 1/2 hp motors that work in conjunction giving this machine 1hp for use on heavy gates.

Commercial Swing Gate operator for use in high traffic applications. This is our most popular swing gate operator. The CSW-2000-UL is designed for high traffic applications such as heavily accessed gated communities and commercial buildings. It is capable of handling gates up to 600 lbs. and 18' at 75 cycles per hour with normal ambient temperatures. The most popular of all swing gate operating systems nationwide, it is designed with the "non-scissor action" arms that greatly reduce the risk of injury.

Electrical Specifications:

Alarm:  If the gate hits a vehicle while closing it re-opens. If it hits a vehicle while opening it stops, reverses 4 to 6 inches and stops again
Alternate Outputs:  With Omni Option board, three push button command control, buglar alarm input and output
Burglar Alarm:  With Omni Option board, interfaces with existing home alarm or alarm output
Digital Motor Protection:  Entrapment sensor shuts off the motor after it reaches the stall amp for 3 seconds, reverses direction for several inches and stops
Electronic Inputs:  Radio receiver, key switch, safety loop, center loop, telephone entry system, computer input, fire department key switch, and 3-push-button station
ERD Sensor:  If the gate hits a vehicle while closing it re-opens. If it hits a vehicle while opening it stops, reverses 4 to 6 inches and stops again
Gate Traveling Time:  Adjusted by a precision mechanical device and electrical limit switch system. Integrated Loop Detectors:  Easy to install, modular, plug in loop detector inputs for exit loop, center loop, and safety loop
Intelligent Master/Second:  Precise, synchronized movement and communication between two gate operators using three wire RS-485 bi-directional technology
Magnetic Lock:  With Omni Option board, magnetic lock system is incorporated, allowing easy addition of the MG1300 locking system to the gate
Modular Board:  Uses LEDs to indicate all input and output functions of the gate operator
Motor Drive: Solid state electronic motor drive system is incorporated into the board
Power Input:  Controls power input to the board with convenient switch
Power Management:  Board includes electronic power management with over curent shutdown and automatic recovery
Spike Suppressors:  20,000 Amps and near lightning protection with modular omni surge suppressor
Initial response:  time: 0.000000000001 seconds
Three Push Button Control:  On board gate operator control for close, stop and open
Timer:  Adjustable timer can be set from 0-60 seconds

Mechanical Specifications:

Approval:  UL and ETL listed to the latest UL325 and UL991 specifications
Chassis:  Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal
Cover:  High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance
Cycles:  75 cycles per hour with a 600 pound gate
Dimensions:  Length = 20.5in x Width = 15in x Height 28in
Emergency Release:  The gate is easily opened by turning the release handle. the best option is our DC-1000CSW
Finish:  All metal parts are gold zinc plated for rust proof protection
Gate:  Length 18 feet maximum gate length
Motor:  1/2 hp, instant reversing, 120VAC, 4 amp, 1625 rpm, with high speed ball bearings
Output:  Shaft 2.5 inch cold rolled steel
Travel Speed:  90° opening in 13-15 seconds
Warranty:  Seven(7) years for single home use and five(5) years for commercial use
Weight Capacity:  600 pounds maximum gate weight
Worm Gear Reduction:  Two, 30-to-1 worm gears equal a 900-to-1 reduction. Both are lubricated in an oil bath