Dual Motor Commercial Slide Gate Operator for use in high temperature environments. One motor opens the gate, the other closes it.
Dual Motor Commercial Slide Gate Operator for use in high temperature environments. One motor opens the gate, the other closes it. The SL-3000-UL-DM™ uses a unique, patented, dual motor feature. One motor opens the gate and the other one closes it, unlike any other operator in the world. Because of this feature the operator can function in less than ideal conditions, such as desert environments, and not overheat the motors. It is capable of continuous cycles on gates up to 37' and 800 lbs.The SL-3000-UL-DM™ is specified for use at heavily accessed high traffic areas such as multiple family communities with 250 or more homes in high ambient temperature applications.
Electrical Specifications:
Electrical Specifications: 120 VAC Power: Built-in 120 VAC power receptacle (NEMA 5-15)
Alarm: If the gate hits an object twice while opening or closing, the system will shut down and an alarm will sound for five minutes
Alternate Outputs: With Omni Option board, three push button command control, burglar alarm input and output. QCC option available
Burglar Alarm: With Omni Option board, interfaces with existing home alarm or alarm output
Digital Motor Protection: Entrapment sensor shuts off the motor after it reaches the stall amp for 3 seconds, reverses direction for several inches and stops
Electronic Inputs: Radio receiver, key switch, hold open loop, center loop, telephone entry system, computer input, fire department key switch, and 3-push-button station
ERD Sensor: If the gate hits a vehicle while closing, it re-opens. If it hits a vehicle wile opening, it stops, reverses 4 to 6 inches, and stops again
Gate Traveling Time: Adjusted by a precision mechanical device and electrical limit switch system Integrated Loop Detectors: Easy to install, modular, plug in loop detector inputs for exit loop, center loop, and hold open loop
Intelligent Master/Slave: Precise, synchronized movement and communication between two gate operators using three wire RS-485 bi-directional technology
Magnetic Lock: With Omni Option board, magnetic lock system is incorporated, allowing easy addition of the MG1300 locking system to the gate
Modular Board: Uses LEDs to indicate all input and output functions of the gate operator
Motor Drive: Solid state electronic motor drive system is incorporated into the board
Power Input: controls power input to the board with convenient switch
Power Management: Board includes electronic power management with over current shutdown and automatic recovery
Soft Stop: Gate travels through the cycle at normal speed and comes to a stop slowly for more accurate gate cycle. Equipped with integrated time delay for long mechanical life expectancy
Spike Suppressors: 20,000 Amps and near lightning protection with modular omni surge suppressor. Initial response time: 0.000000000001 seconds
Three Push Button Control: On board gate operator control for close, stop and open
Timer: Adjustable timer can be set from 0-60 seconds
Mechanical Specifications:
Approval: UL and ETL listed to the latest UL325 and UL991 specifications
Chassis: Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance
Cycles: Capable of continuous cycles daily
Dimensions: Length = 18in x Width = 19in x Height = 25in
Emergency Release: The gate is easily disconnected by turning the release handle. the best option is our DC-1000CSW
Finish: All metal parts are gold zinc plated for rust proof protection. Gate Length 37 feet maximum gate length
Motor: Equipped with two 1/2 hp parking gate motors. One motor opens the gate, the other one closes it. Output Shaft 1 inch cold rolled steel
Travel Speed: 12 inches per second average gate speed
Weight: 139 pounds
Weight Capacity: 800 pounds maximum gate weight
Worm Gear Reduction: 30-to-1 worm gear reduction in an oil bath
